Welcome to the Hispec range of Occupancy Detectors. With these excellent products the client will not only help to save energy, and therefore the planet, but also make considerable savings on electricity bills. Each model has been designed so that they can be easily installed. The recessed model is installed in a similar way to installing a down lighter. Just hold back the integral retaining spring clips and offer the detector through a pre-cut hole of 65mm in the ceiling. Always remember to locate any PIR away from secondary heat sources such as radiators, as this could instigate an un-required activation of the load.

Features:

• Energy Saving


• Easy To Install


• Adjustments To Timer & Lux Level can be made without de-installing


• Surface Model Also Available

Technical:

• AC Operated


• Adjustable LUX control


• Adjustable Time Delay


• Identifies Day and Night Automatically


• Power source: 90V/AC~240V/AC


• Power frequency: 50~60 Hz


• Detection distance: 8m max (<22°C)


• Detection range: 120°(side view) 360°(front view)


• Light-control: 3LUX~1000LUX(adjustable)


• Time-delay: 10sec~14 min ± 1min(adjustable)


• Rated load: Maximum 2000W incandescent lamp (resistive load/220V/AC)


• Maximum 1000W fluorescent lamp (inductive load/220V/AC)


• Installation height: 2m~4m


• Power consumption: 0.5W (static 0.2W)


• Detection motion speed: 0.6~1.5m/s


• Working humidity: <93c/oRH


• Working temperature: -20~40°C

Cut Out: 60mm
Width: 70mm
Height: 75mm

Fitting instructions can be found here:

http://www.hispec.co.uk/fileuploader/download/download/?d=0&file=custom%2Fupload%2FFile-1327422143.pdf