Curved Edge 13A 2G DP Switched Socket

Gently contoured 7mm plate with rounded edges, includes screw cap covers. 13A rated with double pole switch. Top access to captive terminals to speed up installation. Twin earths. Manufactured to the latest British Standards.

Curved Edge 13A 1G DP Switched Socket

Gently contoured 7mm plate with rounded edges, includes screw cap covers. 13A rated with double pole switch. Top access to captive terminals to speed up installation. Manufactured to the latest British Standards.

Curved Edge 13A 2G SP Switched Socket

Gently contoured 7mm plate with rounded edges, includes screw cap covers. 13A rated with single pole switch. Top access to captive terminals to speed up installation. Twin earths. Manufactured to the latest British Standards.

Curved Edge 13A 1G SP Switched Socket

Gently contoured 7mm plate with rounded edges, includes screw cap covers. 13A rated with single pole switch. Top access to captive terminals to speed up installation. Manufactured to the latest British Standards.

Curved Edge 13A 1G Switched Socket with USB Charger (5V DC 2.1A)

Gently contoured 7mm plate with rounded edges, includes screw cap covers. Comes with built in USB charger slot rated at 5V DC 2.1A. 13A rated. Manufactured to the latest British Standards. NB: requires 35mm pattress box if surface mounting (CU1700).

Curved Edge 13A 2G Switched Socket with Dual USB Charger (5V DC 3.1A shared)

Gently contoured 7mm plate with rounded edges, includes screw cap covers. Comes with two built in USB charger slots rated at 5V DC 3.1A (shared across both slots). 13A rated. Top access to captive terminals to speed up installation. Twin earths. Manufactured to the latest British Standards. Recommend fitting into a 25-35mm back box dependent on wiring conditions. NB: requires 35mm pattress box if surface mounting (CU1800).

Curved Edge 13A 1G Unswitched Socket

Gently contoured 7mm plate with rounded edges, includes screw cap covers. 13A rated. Top access to captive terminals to speed up installation. Manufactured to the latest British Standards.

Curved Edge 13A 2G Unswitched Socket

Gently contoured 7mm plate with rounded edges, includes screw cap covers. 13A rated. Top access to captive terminals to speed up installation. Twin earths. Manufactured to the latest British Standards.

Curved Edge 5A Unswitched Round Pin Socket

Gently contoured 7mm plate with rounded edges, includes screw cap covers. These are primarily used only for lighting circuits. 5A rated. Manufactured to the latest British Standards.

Curved Edge Dual Voltage Shaver Socket with Neon

Gently contoured 7mm plate with rounded edges, includes screw cap covers. Comes complete with transformer and isolates the mains supply making it safe and suitable for bathroom use. Dual voltage 115V/230V. Manufactured to the latest British Standards.

Curved Edge 10A 1G 1-Way Switch

Gently contoured 7mm plate with rounded edges, includes screw cap covers. 1 way switches are generally used to control one light or group of lights. A typical example of this is a bedroom or single entry point room. Manufactured to the latest British Standards.

Curved Edge 10A 1G 2-Way Switch

Gently contoured 7mm plate with rounded edges, includes screw cap covers. 2 way switches are generally used when there are two switches controlling one light. A typical example of this is when a room has two entrances (like a through lounge) where there is a switch positioned at either entrance. Manufactured to the latest British Standards.

Curved Edge 10A 2G 2-Way Switch

Gently contoured 7mm plate with rounded edges, includes screw cap covers. 2 way switches are generally used when there are two switches controlling one light. A typical example of this is when a room has two entrances (like a through lounge) where there is a switch positioned at either entrance. Manufactured to the latest British Standards.

Curved Edge 10A 3G 2-Way Switch

Gently contoured 7mm plate with rounded edges, includes screw cap covers. 2 way switches are generally used when there are two switches controlling one light. A typical example of this is when a room has two entrances (like a through lounge) where there is a switch positioned at either entrance. Manufactured to the latest British Standards.

Curved Edge 10A 4G 2-Way Switch

Gently contoured 7mm plate with rounded edges, includes screw cap covers. 2 way switches are generally used when there are two switches controlling one light. A typical example of this is when a room has two entrances (like a through lounge) where there is a switch positioned at either entrance. Manufactured to the latest British Standards.

Curved Edge 10A 4G 2-Way Switch (on single plate)

Gently contoured 7mm plate with rounded edges, includes screw cap covers. 2 way switches are generally used when there are two switches controlling one light. A typical example of this is when a room has two entrances (like a through lounge) where there is a switch positioned at either entrance. Manufactured to the latest British Standards.

Curved Edge 10A 6G 2-Way Switch

Gently contoured 7mm plate with rounded edges, includes screw cap covers. 2 way switches are generally used when there are two switches controlling one light. A typical example of this is when a room has two entrances (like a through lounge) where there is a switch positioned at either entrance. Manufactured to the latest British Standards.

Curved Edge 10A Intermediate Switch

Gently contoured 7mm plate with rounded edges, includes screw cap covers. An intermediate switch is used when you have three switches controlling one light. A typical example of this is on a landing. There is a switch at the bottom of the stairs, one at top of the stairs and one at the end of the landing. On this circuit you would need the middle switch to be intermediate (i.e. the one at the top of the stairs) in order for all the switches to function properly. Manufactured to the latest British Standards.

Curved Edge 10A 3-Pole Fan Isolator Switch

Gently contoured 7mm plate with rounded edges, includes screw cap covers. Provides a safe and simple method of isolating fan units in en-suite bathrooms, family bathrooms, utility rooms, store rooms etc. Often the fan unit will be wired into the lighting circuit for convenience and efficiency. With this kind of installation there is often a need to leave the lighting circuit live whilst isolating the fan for maintenance. This model is triple pole with a 10A rating. Manufactured to the latest British Standards.

Curved Edge 10A Intermediate Switch Module

For use with the curved edge series.Enables an additional intermediate position to be placed in 2G, 3G , 4G and 6G faceplates. Simple remove existing 2-way switch and install intermediate for bespoke lighting solutions

Curved Edge 1G 40-400W Dimmer

Gently contoured 7mm plate with rounded edges, includes screw cap covers. Matching dimmer caps, push on/off operation. 40-400W rating for incandescent lamps and 3-100W rating for LED lamps. Manufactured to the latest British Standards. NB: Please check with lamp manufacturer for compatibility.

Curved Edge 2G 40-400W Dimmer

Gently contoured 7mm plate with rounded edges, includes screw cap covers. Matching dimmer caps, push on/off operation. 40-400W rating for incandescent lamps and 3-100W rating for LED lamps. Manufactured to the latest British Standards. NB: Please check with lamp manufacturer for compatibility.

Curved Edge 3G 40-400W Dimmer

Gently contoured 7mm plate with rounded edges, includes screw cap covers. Matching dimmer caps, push on/off operation. 40-400W rating for incandescent lamps and 3-100W rating for LED lamps. Manufactured to the latest British Standards. NB: Please check with lamp manufacturer for compatibility.

Curved Edge 4G 40-400W Dimmer

Gently contoured 7mm plate with rounded edges, includes screw cap covers. Matching dimmer caps, push on/off operation. 40-400W rating for incandescent lamps and 3-100W rating for LED lamps. Manufactured to the latest British Standards. NB: Please check with lamp manufacturer for compatibility.

Curved Edge 1G Dimmer Plate with Matching Dimmer Cap

Gently contoured 7mm plate with rounded edges, includes screw cap covers. Matching dimmer caps. Suitable for mounting Knightsbridge dimmer modules or other after-market dimmer modules for a bespoke solution.

Curved Edge 2G Dimmer Plate with 2 Matching Dimmer Cap

Gently contoured 7mm plate with rounded edges, includes screw cap covers. Matching dimmer caps. Suitable for mounting Knightsbridge dimmer modules or other after-market dimmer modules for a bespoke solution.

Curved Edge 13A Fused Spur Unit

Gently contoured 7mm plate with rounded edges, includes screw cap covers. Fused spur unit or fused connection unit, is an electrical switch with a built in fuse, designed for appliances that do not have or require a fused plug top. Fused spur units are also used for high powered electrical equipment with heavy continuous loads, so that the appliance can be isolated by a single cable from a ring main for safety and maintenance purposes. This model is 13A rated. Manufactured to the latest British Standards.

Curved Edge 13A Fused Spur Unit with 3A Fuse Fitted

Gently contoured 7mm plate with rounded edges, includes screw cap covers. Fused spur unit or fused connection unit, is an electrical switch with a built in fuse, designed for appliances that do not have or require a fused plug top. Fused spur units are also used for high powered electrical equipment with heavy continuous loads, so that the appliance can be isolated by a single cable from a ring main for safety and maintenance purposes. This model is 13A rated. Manufactured to the latest British Standards.

Curved Edge 13A Fused Spur Unit with Neon

Gently contoured 7mm plate with rounded edges, includes screw cap covers. Fused spur unit or fused connection unit, is an electrical switch with a built in fuse, designed for appliances that do not have or require a fused plug top. Fused spur units are also used for high powered electrical equipment with heavy continuous loads, so that the appliance can be isolated by a single cable from a ring main for safety and maintenance purposes. This model is 13A rated. Manufactured to the latest British Standards.

Curved Edge 13A Switched Fused Spur Unit

Gently contoured 7mm plate with rounded edges, includes screw cap covers. Fused spur unit or fused connection unit, is an electrical switch with a built in fuse, designed for appliances that do not have or require a fused plug top. Fused spur units are also used for high powered electrical equipment with heavy continuous loads, so that the appliance can be isolated by a single cable from a ring main for safety and maintenance purposes. This model is 13A rated. Manufactured to the latest British Standards.

Curved Edge 13A Switched Fused Spur Unit with Flex Outlet from Base

Gently contoured 10mm plate with rounded edges, includes screw cap covers. Fused spur unit or fused connection unit, is an electrical switch with a built in fuse, designed for appliances that do not have or require a fused plug top. Fused spur units are also used for high powered electrical equipment with heavy continuous loads, so that the appliance can be isolated by a single cable from a ring main for safety and maintenance purposes. This model is 13A rated. Additional depth on plate from 7mm to 10mm allows for a cable exit from the base of the unit. Manufactured to the latest British Standards.

Curved Edge 13A Switched Fused Spur Unit with Neon

Gently contoured 7mm plate with rounded edges, includes screw cap covers. Fused spur unit or fused connection unit, is an electrical switch with a built in fuse, designed for appliances that do not have or require a fused plug top. Fused spur units are also used for high powered electrical equipment with heavy continuous loads, so that the appliance can be isolated by a single cable from a ring main for safety and maintenance purposes. This model is 13A rated. Manufactured to the latest British Standards.

Curved edge 20A DP Switch

Gently contoured 7mm plate with rounded edges, includes screw cap covers. Mainly used for a fixed appliance such as a watSer heater. 20A rated. Manufactured to the latest British Standards.

Curved Edge 20A DP Switch with Neon

Gently contoured 7mm plate with rounded edges, includes screw cap covers. Mainly used for a fixed appliance such as a water heater. 20A rated. Manufactured to the latest British Standards.

Curved Edge 20A Flex Outlet Plate

Gently contoured 7mm plate with rounded edges, includes screw cap covers. A flex outlet is a wall outlet which has a flexible cable permanently wired into it. Cable entry/exit is possible from centre or base of plate. 20A rated. Manufactured to the latest British Standards.

Curved Edge 45A DP Switch and 13A Switched Socket

Gently contoured 7mm plate with rounded edges, includes screw cap covers. Cooker control units enable isolation of the unit so that maintenance and repairs can be carried out separately. The unit can be switched off, preventing the appliance from being turned on accidentally - for example whilst cleaning. Can control two or more cooking appliances in the same room, providing rating is sufficient. This model is double sized with 45A rating with built in 13A socket. Manufactured to the latest British Standards.

Curved Edge 45A DP Switch and 13A Switched Socket with neons

Gently contoured 7mm plate with rounded edges, includes screw cap covers. Cooker control units enable isolation of the unit so that maintenance and repairs can be carried out separately. The unit can be switched off, preventing the appliance from being turned on accidentally - for example whilst cleaning. Can control two or more cooking appliances in the same room, providing rating is sufficient. This model is double sized with 45A rating with built in 13A socket. Manufactured to the latest British Standards.

Curved Edge 45A DP Switch (small)

Gently contoured 7mm plate with rounded edges, includes screw cap covers. Cooker switches enable isolation of the unit so that maintenance and repairs can be carried out separately. The unit can be switched off, preventing the appliance from being turned on accidentally - for example whilst cleaning. Can control two or more cooking appliances in the same room, providing rating is sufficient. Manufactured to the latest British Standards.

Curved Edge 45A DP Switch with Neon (small)

Gently contoured 7mm plate with rounded edges, includes screw cap covers. Cooker switches enable isolation of the unit so that maintenance and repairs can be carried out separately. The unit can be switched off, preventing the appliance from being turned on accidentally - for example whilst cleaning. Can control two or more cooking appliances in the same room, providing rating is sufficient. Manufactured to the latest British Standards.

Curved Edge 45A DP Switch (large)

Gently contoured 7mm plate with rounded edges, includes screw cap covers. Cooker switches enable isolation of the unit so that maintenance and repairs can be carried out separately. The unit can be switched off, preventing the appliance from being turned on accidentally - for example whilst cleaning. Can control two or more cooking appliances in the same room, providing rating is sufficient. Manufactured to the latest British Standards.

Curved Edge 45A DP Switch with Neon (large)

Gently contoured 7mm plate with rounded edges, includes screw cap covers. Cooker switches enable isolation of the unit so that maintenance and repairs can be carried out separately. The unit can be switched off, preventing the appliance from being turned on accidentally - for example whilst cleaning. Can control two or more cooking appliances in the same room, providing rating is sufficient. Manufactured to the latest British Standards.

Curved edge 45A Cooker Connection Unit

Gently contoured 23mm plate with rounded edges, includes screw cap covers. Concealed fitting, large capacity easy to wire terminals, clamp fitted, with a bottom knockout for outgoing cable. 45A rated. Manufactured to the latest British Standards.

Curved Edge Telephone Master Socket

Gently contoured 7mm plate with rounded edges, includes screw cap covers. The master socket contain a surge arrestor and an R/C circuit filter these are used by your service provider to get a fixed value resistance when they run line checks. Standard BT type socket with screw type terminals.

Curved Edge Telephone Extension Socket

Gently contoured 7mm plate with rounded edges, includes screw cap covers. Secondary or extension telephone sockets are used to run additional points of the original master socket. Standard BT type socket with screw type terminals.

Curved Edge Coax TV Outlet (non-isolated)

Curved Edge Coax TV Outlet (non-isolated)

Curved Edge Twin Coax TV Outlet (non-isolated)

Gently contoured 7mm plate with rounded edges, includes screw cap covers. For standard TV/Coax connections (non-isolated). Non-isolated outlets are the standard type for domestic installations.

Curved Edge Coax TV Outlet (isolated)

Gently contoured 7mm plate with rounded edges, includes screw cap covers. For installations where a communal aerial is installed, for example an apartment block. The isolated socket blocks interference from other users/connections which may otherwise spoil the signal.

Curved Edge Coax TV and SAT TV Outlet

Gently contoured 7mm plate with rounded edges, includes screw cap covers. For TV and satellite installations.

Curved Edge SAT TV Outlet (non-isolated)

Gently contoured 7mm plate with rounded edges, includes screw cap covers. For standard SAT TV connections (non-isolated). Non-isolated outlets are the standard type for domestic installations.

Curved Edge 1G Blanking Plate

Gently contoured 7mm plate with rounded edges, includes screw cap covers. Used to neatly cover unused or redundant boxes.

Curved Edge 2G Blanking Plate

Gently contoured 7mm plate with rounded edges, includes screw cap covers. Used to neatly cover unused or redundant boxes.

Curved Edge 1G Modular Faceplate

Gently contoured 7mm plate with rounded edges, includes screw cap covers. Used to house euro-module inserts to create bespoke TV/SAT/HDMI/USB solutions.

Curved Edge 2G Modular Faceplate

Gently contoured 7mm plate with rounded edges, includes screw cap covers. Used to house euro-module inserts to create bespoke TV/SAT/HDMI/USB solutions.

Curved Edge 4G Modular Faceplate

Gently contoured 7mm plate with rounded edges, includes screw cap covers. Used to house euro-module inserts to create bespoke TV/SAT/HDMI/USB solutions.

Please ALLOW 2 WORKING DAYS for DELIVERY Thank you